Home Inspector Blog
Michael Burfitt, CPI
Home Inspector Blog
Michael Burfitt, CPI
In my quest to become Halifax’s top home inspector I have strived to learn so much about my profession that I have been called a walking encyclopedia of home knowledge and I wear that label with pride. I continually update my knowledge base to give you the Inside Edge (shameless plug) in my home inspections.
So far, out of the very long list of courses I have taken there is only one in which I struggled to complete and that was the Advanced Stucco and EIFS course. The reason for this is very simple: while this type of wall covering is common throughout the world and used frequently in commercial and industrial settings, it is almost never seen in Nova Scotian homes. The few Stucco/EIFS houses I have seen in and around Halifax & Dartmouth have usually been replaced with standard vinyl siding, presumably due to moisture intrusion issues. Obviously, I had to find out why and if these systems are really that bad.
First, it is important to note Stucco and EIFS (and even systems I looked at previously like ICF) look identical on the surface but are quite different, so let us look at Stucco first.
There are a few ways of creating Stucco, but the basic formula is a mix of Portland Cement, Sand, Lime and Water. It is a heavy system that is generally affordable, relatively easy to install and easy to repair. It has been used all over the world for a good reason, just not here in Nova Scotia.
Why is Stucco Not Popular in our Province?
The reason is simple: it has two main disadvantages:
1) stucco is prone to cracking over time
2) stucco is susceptible to buckling in climates that have rapidly changing seasons, such as those with rapid freeze/thaw cycles.
Sound familiar? It bears repeating that water is the #1 enemy of homes, so this makes Stucco a poor choice in most circumstances in our region.
External Insulation and Finishing Systems (EIFS) are also known as Synthetic Stucco. This method of construction is relatively modern, being introduced to North America in 1969. It is a system that is both lighter and more energy efficient, since it usually contains rigid insulation. It is also much more resistant to cracking and other weather-related damage. There are several different EIFS systems that can be broken down into two basic categories:
What’s Wrong With EIFS?
There are plenty of horror stories about EIFS, with some inspectors even going so far as to recommend immediate and complete removal of the EIFS. Yikes!
EIFS, like many modern building products (such as roof trusses) are engineered proprietary systems. What this means is that the manufacturer’s instructions must be carefully followed during installation to prevent moisture intrusion and consequently significant damage to a home. While there are certainly plenty of skilled contractors in our area, the recent building boom has seen residential build quality decline significantly in recent years. Once moisture gets behind an EIFS, it can cause significant wood decay and mold growth and can lead to serious and costly damage to the home that can go undetected for years. Given we live in one of North America’s wettest regions, a poorly installed EIFS system can have devastating long-term consequences and is one reason why most homeowners and builders steer clear of this system.
Different areas of North America tend to favor one specific type of house siding and Nova Scotia is no exception. In this week’s blog post, we look at some of the most common types of siding seen in our province.
This is the most popular choice in North America (about 1/3 of all installations) and is the overwhelming choice for homes in Nova Scotia. It has largely replaced wood and metal siding due to its combination of value, durability and lack of required maintenance. Not only does vinyl siding not need to be painted, but the colour goes all the way through the material and doesn't just cover the surface, meaning a scratch or other minor damage will not affect its appearance. Home inspectors look at several concerns such as signs of waviness, joints not staggered properly (a clear sign of poor or amateur installation) and proper detailing around windows, doors, and other penetrations.
While relatively easy to install, it still takes skill to do properly. It has recently come to my attention that in my subdivision, the installation techniques were far from high quality, a fact I can personally attest to that when in 2018 we lost a significant amount of siding. These deficiencies can be hard to detect during a standard home inspection.
Masonry (Brick, Stone & Concrete)
I have previously covered this type of siding in a previous blog post. Inspectors look for signs of spalling, mortar deterioration and bowing walls (more common in older installations). In my experience these are usually quality installations by skilled masons and are generally well maintained.
Wood Shingles and Shakes
Most wood siding is composed of cedar due to its rot resistance. Other species of wood can be used (such as pine) but it requires additional preservatives to protect against rot. Wood siding also requires regular maintenance (such as painting or staining) and has little in the way of fire resistance. There are many different types of wood siding installation:
Asbestos is a scary word and as a result asbestos cement siding has received an unfair bad reputation. As can be seen on my previous posts on asbestos, it is only dangerous in a friable state. Translation: there is no danger if the siding is not disturbed by heavy mechanical damage. Overall, it is a good siding material but since it was discontinued many years ago properly repairing it may be difficult, if not impossible.
Modern versions of fiber-cement are commonly known by its main trade name Hardie board. It has many of the advantages of asbestos siding without the…. you know…. asbestos. It can be very hard to tell apart from wood and possibly my single biggest goof up as a home inspector was mistaking Hardie board for wood siding. It was located only in a specific area of the home on the second level and it taught me to always verify my visual observations by touch as much as humanly possible.
Even though these two systems look identical, they are quite different. They are also common…. in commercial settings. Despite being very common on homes in other areas of North America, they are very rarely seen on houses in Nova Scotia. I actually had to do some research on these two types of siding and why they aren't more common, to which I will share my findings in next week’s blog.